학술정보
학술정보Hemostasis
[Technology] (Basic Principle) Enzyme kinetics  

작성자 : 관리자(bioms@hanmail.net) 작성일 : 2020.07.22 조회수 : 334  
Enzyme kinetics
An enzyme acts as a catalyst for a certain chemical reaction. This means that the enzyme decreases the activation energy and reaction time for the reaction without changing the equilibrium. The enzyme is neither consumed nor modified in the reaction. An enzymecatalyzed reaction starts with the formation of an enzymesubstrate complex, ES. (1) The rate of product formation depends on the concentration of enzymesubstrate complex. (2) The rates of formation and consumption of ES can be written as: (3) rate of consumption of ES (4) At steady state, [ES] is constant and the rates in (3) and (4) are equal: (5) Rearrangement of (5) gives an expression for [ES] at steady state: (6) The Michaelis constant, Km, is defined below: (7) The concentration of free enzyme [E] equals the total enzyme concentration minus the concentration of enzymesubstrate complex: (8) Substitution of (7) and (8) into (6) gives: (9) Substituting this expression for [ES] in (2) gives: (10) The reaction reaches its maximal rate, Vmax, when all active sites of the enzyme are occupied, i.e. when [S] is much larger than Km, which means that [S]/[S]+Km approaches 1. (11) these conditions product molecules are formed at a constant and maximal velocity. Equation (11) can also be written as: (12) k3 reflects the turnover number, which is the maximal number of substrate molecules that can be converted to product per time unit, dimension time 1. The MichaelisMenten equation (13) is obtained from (10) and (11) and explains the relationship between reaction rate and substrate concentration as shown in Figure 5.
At a low substrate concentration ([S] << Km), then (14) i.e. the rate is directly proportional to [S]. (15) i.e. the reaction rate is independent of [S]. (16) which means that the Michaelis constant Km is equal to the substrate concentration at which the reaction rate is exactly half the maximum rate or Vmax/2. (17) A plot of 1/V versus 1/[S] is called the LineweaverBurk plot or doublereciprocal plot, and has the intercept 1/Vmax and the slope Km/Vmax. Thus, the kinetic parameters Km and Vmax are readily derived by measuring the rate of catalysis at different substrate concentrations.
Multiplication of both sides of equation (17) with the substrate concentration [S] gives (18) The plot of [S]/V versus [S] is sometimes referred to as the Hanes plot. The advantage of the Hanes plot over the LineweaverBurk plot is that the experimental errors in V give in the former a more or less constant contribution over a wide range of [S] values (15). Consequently, more accurate results are obtained using the Hanes procedure for data treatment.


이전글  (Basic Principle) Enzyme specificity and substrate selectivity 
다음글  (Basic Principle) Chromogenic substrates in practice 